Cookie Img
Home » Products » Electrical Lab Trainer Equipments » SERVO MECHANISMS

SERVO MECHANISMS

SERVO MECHANISMS
SERVO MECHANISMS
Send Inquiry
Product Code : BTE-1812
Brand Name : Biotek
Product Description
SERVO MECHANISMS
  •  S E R V O M E C H A N I S M F O R S T E P P E R M O T O R Servomechanism characteristic: set-points which can be fixed inside or via PC; output current: variable from 4 to 10 A; operative mode: bipolar; “H”-bridge power stage with 4 MOSFET power transistors; high switching frequency; control: bidirectional; protections: max./min. voltage, temperature short-circuit; Diagnostics with signaling LED diodes; single phase rectifier bridge from network
  •  Motor unit characteristics: metal base; 2-phase stepper motor; step angle:1.8º; bipolar nominal angle: 4A; bipolar torque: 110N.cm
  •   DIM: about 380x330x130 mm; weight: about 10kg;
  •   Power supply-single-phase 115V/230V±10% 50/60Hz
  •   SERVOMECHANISMS MODULE Servomechanism characteristics: speed set-point which can be fixed via potentiometer or PC; speed regulation range: from 0 r.p.m to 3000r.p.m.
  •  Motor unit characteristics: metal base; wounded rotor DC motor with separate excitation; tacho generator splined to the motor shaft; Nominal armature speed:3000 r.p.m
  • Power supply: single phase 115V/230V±10%, 50/60
  •  Servomechanism characteristics: speed-set point which can be fixed via potentiometer or PC; speed regulation range: ± 3000r.p.m.
  •  Motor unit characteristics: metal base; permanent magnet DC motor; tacho generator splined to the motor shaft; nominal armature voltage 80 V; nominal armature current 8A nominal speed: ±3000r.p.m.
  •  Power supply: single phase 115V/230V±10%50/60Hz
  •  Max. about 1kVA;
 SERVOMECHANISM FOR PERMANENT MAGNETS DC MOTOR :Servomechanism characteristic: set points
which can be fixed inside or via PC; output current: variable from 4 to 10 A; operative mode:
bipolar; “H”-bridge power stage with 4 MOSFET power transistors; high switching frequency; control:
bidirectional; protections: max./min. voltage, temperature short-circuit; Diagnostics with signaling
LED diodes; single phase rectifier bridge from network
  •  Motor unit characteristics: metal base; 2-phase stepper motor; step angle:1.8º; bipolar nominal angle: 4A; bipolar torque: 110N.cm.
  •  DIM: about 380x330x130 mm; weight: about 10kg.
  •  Power supply-single-phase 115V/230V±10% 50/60Hz.

BIOTEK ENGINEERS
X


Contact Details
BIOTEK ENGINEERS All Rights Reserved.