Cookie Img
Home » Products » Hydraulic Fluid Mechanics Lab Equipments » Training Equipment In Industrial Pneumatics

Training Equipment In Industrial Pneumatics

Training Equipment In Industrial Pneumatics
Training Equipment In Industrial Pneumatics
Send Inquiry
Product Code : BE-2141E
Brand Name : Biotek
Product Description
Training Equipment In Industrial Pneumatics :

Biotek Engineers is manufacture, exporters & suppliers of  Training Equipment In Industrial Pneumatics.

Training Equipment In Industrial Pneumatics :

The set up comprises a Mobile Lab. Trolley, set of Pneumatic Components and a Comprehensive Manual.Mobile lab. trolley
  1. Approx. dim: 1210mm(L) x 750mm(W) x 1450mm(H).
  2. The trolley must have two (2) circuit building plugboards (approx. size) 1100mm x 700mm, each with mounting holes must be fitted with rubber component retaining grommets.
  3. The boards must be powder coated 16swg steel (at least), with 2mm shrouded sockets for electrical distribution built into the plugboard.
  4. There must be two (2) lockable equipment storage cabinets, each consists of five (5) drawers (depths are 1 x 66mm, 2 x 85mm, 1 x 130mm, 1 x 200mm - approx. sizes). Cabinets and all drawers to be steel, powder coated construction including drawer fronts.
  5. The trolley must be mounted on four (4) heavy duty, rubber tyred castors two (2) of which are swivel and lockable.
  6. The trolley must be mounted on four (4) heavy duty castors two(2) of which are swivel and lockable. Set of Components - Pneumatics, comprises:-
  7. 1 x Air service unit (filter/pressure regulator) with ON/OFF valve and pressure gauge
  8. 1 x 6-way manifold with check fittings (airflow blocked on removal of tubing)
  9. 1 x Single Acting Cylinder - 16mm diameter, 50mm stroke
  10. 2 x Double Acting Cylinder - 16mm diameter, 100mm stroke with magnetic piston for contactless sensing
  11. 4 x 3/2 way Push Button Valve (2 baseplates each with 2 valves)
  12. 1 x 3/2 way Toggle Lever Valve
  13. 1 x Visual Indicator
  14. 1 x 5/2 way Toggle Lever Valve
  15. 1 x 5/2 way Pilot/spring Valve
  16. 3 x 5/2 way Pilot/Pilot Valve
  17. 1 x 5/3 way Pilot/Pilot Valve with Closed centre
  18. 2 x 3/2 way Roller Lever Valve (for instroke operation) -mounted on adjustable baseplate (must have both vertical and horizontal adjustment).
  19. 2 x 3/2 way Roller Lever Valve (for outstroke operation) - mounted on adjustable baseplate (must have both vertical and horizontal adjustment).
  20. 1 x 3/2 way Adjustable Timer valve
  21. 2 x Throttle / Check Valve (on one baseplate)
  22. 1 x Quick Exhaust Valve
  23. 4 x Shuttle Valve / OR Gate (2 baseplates each with 2 valves)
  24. 2 x Two Pressure Valve / AND Gate (on one baseplate)
  25. 1 x Stainless Steel Air Reservoir
  26. 1 x Pressure Gauge
  27. 10 x Push-fit Tee
  28. 10 x Push-fit Plug
  29. 15 metres 4mm o.d. polyurethane tubing
  30. 5 metres 6mm o.d. polyurethane tubing
  31. All pneumatic components should mount on four (4) pin plug-in baseplate, complete ready to use with pneumatic connections for 4mm o.d. tubing (supplied) and 2mm shrouded plugs / sockets for electrical connections. All threaded exhaust ports to be fitted with silencers.



BIOTEK ENGINEERS
X


Contact Details
BIOTEK ENGINEERS All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.